WAVEGUIDE TO MICROSTRIP CONNECTORS.

The connectors are intended for the matched power signal transition from waveguide into microstrip, and vice versa. The microstrip type is according to Customer's request.

The connectors are intended for the matched power signal transition from waveguide into coaxial and vice versa. The coaxial type connector is according to Customer's request.

SPECIFICATION

PARAMETERS	WAVEGUIDE- MICROSTRIP CONNECTORS	COAX- WAVEGUIDE CONNECTORS
Frequency range, GHz	3,2...110	1...18 - 18...50
VSWR within 5 … 35% operating frequency range	typically < 1,3	typically < 1,2

WAVEGUIDE TRANSITIONS FROM WAVEGUIDES OF GOST 13317-89
TO WAVEGUIDES OF RETMA TR 108-A (USA)
WITH THE APPROPRIATE FLANGE STANDARTS.

The transitions are intended for joint the waveguides developed in CIS (Russia, Ukraine and etc.) with the waveguides developed according to standarts of USA, Japan, Germany, Great Britain, France, etc. The transitions provide the minimal losses of signal and high shielding (no less than 80 dB).

SPECIFICATION

Frequency range, GHz	9...110
Dimensions, less	АxАx(0,2…1,5)А
VSWR within operating frequency band of waveguides, dB	<1,02
Losses within operating frequency band (1…10%), dB	типично <1,5
Coating (according to Customer's requirements)	Ag, Au, Ni

А - the widen dimension of waveguide flange

LOW POWER (UP TO 1.5 W) WAVEGUIDE LOADS
WITH THE FLANGE ACCORDING TO GOST 13317-89 OR
RETMA TR 108-A (USA) STANDARTS

SPECIFICATION

Frequency range, GHz	9...110
VSWR in 10% frequency band	<1,05
VSWR in up to 35% frequency band	< 1,15
Coating (according to the Customer's request)	Ag, Au, Ni

А - the widen dimension of wavequide flange

RECTANGULAR STRAIGTH WAVEGUIDE WITH FLANGE
ACCORDING TO GOST 13317-89 OR RETMA TR 108-A (USA) STANDARTS

SPECIFICATION

Frequency range, GHz	9...110
Waveguide length (according to Customer's request), mm	20...250
VSWR in within operating waveguide frequency range	<-40
Coating (according to Customer's request)	Ag, Au, Ni

А - the widen dimension of waveguide flange

Е- AND Н- PLANE
90°, 60° AND 45° WAVEGUIDE BENDS WITH FLANGES
ACCORDING TO GOST 13317-89 OR RETMA TR 108-A (USA) STANDARTS

SPECIFICATION

Frequency range, GHz	9...110
VSWR within 12% frequency band	<1,08
VSWR within 35% frequency band	<1,12
Coating (according to Customer's request)	Ag, Au, Ni

90°, 60° AND 45° WAVEGUIDE TWISTS WITH FLANGES
ACCORDING TO GOST 13317-89 OR RETMA TR 108-A (USA) STANDARTS

SPECIFICATION

Frequency range, GHz	9...110
VSWR within 12% frequency band	<1,12
VSWR within 25% frequency band	<1,2
Coating (according to Customer's request)	Ag, Au, Ni

L - length=(2…4)xА; А - widen dimension of wavequide flange