|
LNRFE - 3515542050 RECEIVER WITH INPUT LIMITER
The receiver is intended for the amplification and conversion of weak signals into signals of intermediate frequency. The conversion is performed by balance (on 2nd) harmonic mixer. The receiver input is protected by input limiter controlled by TTL level signal (0 - direct losses, 1 - closed).
SPECIFICATION
| Noise figure, dB, no more | 5 |
| Gain, dB, no less | 20 |
| Gain ripple, dB, no more | ±0,5 |
| Input signal suppression 1w, dB, no less | 45 |
Maximal input power:
- impulse signal, W, no more
- continious signal, W, no more |
10
1 |
| Input frequency range, GHz | 35,2±0,5 |
| LO frequency, GHz | 14,9±0,5 |
| LO power, mW | 10 |
| Intermediate frequency, GHz | 5,4±0,5 |
| Image channel rejection, dB, no less | 22 |
| Input - 7,11 х 3,55 waveguide | WR-28 |
Mounting dimension of input* - non standard:
- spacing between fixing holes,
- hole diameter on the connected devices |
12 and 10
2,5 |
| LO-connector (narrow and shorten flange with inch thread) to like | SMA |
| IF output connector (narrow and shorten flange with inch thread) to | SMA |
| Supply voltage, V | +8V and - 8V |
Consumption current:
at +8V, mА
at -8V, mА |
200
20 |
| Dimensions, mm | 80х14х14 |
| Operating temperature range, °C | 0... +40 |
| Weight, g | 100 |
|
TM
